Dirt and stains typically consist of particles such as minerals from soil, protein and other organic matter from living things, or bits of black carbon. The particles are trapped on cloth fibers by grease and oil, which cannot be dissolved in water. By understanding the chemistry of stain removal, you can solve almost all stain problems.

 

  • Don’t procrastinate. The sooner you attend to a stain, the better.
  • Think twice before just throwing stained clothing in the laundry. The heat of the water and dryer can set in many stains.
  • To remove the stain, start by scraping, blotting, vacuuming or otherwise removing as much of the stain as you can. Never rub in the stain.
  • Identify the stain. Treating a chocolate stain, for example, is different than what you’d do if you spilled coffee on your favorite shirt. If you know what caused the stain, you can find the right treatment.
  • Visit our stain removal section for chemistry-based solutions to common stains.
  • Pretest on the fabric to make sure the fabric won’t be harmed by the treatment.
  • Warm or cool water is the safest for stain removal because hot water and heat can set in stains.
  • When fabric is very dirty, such as after floods or with clay and ground-in dirt, you may want to choose a powdered laundry detergent. If the laundry isn’t full of soil and dirt, liquid laundry detergent is the better choice — it’s less likely to leave mineral residue on the clothes if you have hard water. When washing really dirty clothes, wash whites separately (even if they’re dirty, too) because they will turn gray in dirty water.
  • Be patient. You may have to try a couple of things before you find the one that works on your stain.

 

Although you may need to try several different methods for stain removal, you should not combine different stain removers in an attempt to treat the stain. This can cause adverse chemical reactions, such as formation of a toxic gas when you combine bleach and ammonia. To avoid this, thoroughly rinse and remove one stain removal treatment product before trying another one.

 

Check for colorfastness. Some harsher treatments for removing stains may change the color of the fabric you are trying to treat. There is nothing worse than a bright white spot on a red t-shirt where the stain remover removed the stain, but also the red dye in the shirt. Test for colorfastness in an inconspicuous area of clothing first.

 

Always check to make sure the stain is removed before you place it in the dryer. Nothing sets a stain worse than drying it in a dryer. If your stain removal method did not completely remove the stain after going through the wash, try something else. At the least, let it air dry instead of placing it in the dryer so you will have a better shot at removing the stain with another method.